© by N&W GLOBAL VENDING S.p.A.
42
05-2015 3625 01
f
ailurE
rEsEt
Confirm this function to reset all current failures, if any.
m
otor
Errors
Use this function to display faulty motors for about 1
second.
All faulty motors are scrolled automatically.
Note:
if you power on the machine again, any motor that
may have jammed is found out as not available.
m
otor
statE
Use this function to learn the failure that last occurred
on every single spiral even if the machine configuration
provides for an empty position.
A motor can be in one of the following states:
-
motor running;
-
motor not available; when the motor is not detected as
soon as you power on the machine.
-
motor disconnected; when a motor is detected as soon
as you power on, but not during the dispensing cycle.
-
motor locked; when the positioning switch is not oper
-
ated within the “time out” time.
-
empty spiral; when the dispensed product is not de
-
tected when the dispensing control device is mounted
(photocells).
m
otor
Error
rEsEt
Confirm this function to reset all current failures, if any.
f
ailurE
History
filE
Use this function to display the failure history file. The
history file shows the failure with the corresponding date
and time.
f
ailurE
History
filE
rEsEt
Confirm the function to reset all the failures in the list
"Failure history file".
