© by N&W GLOBAL VENDING S.p.A.
27
05-2015 3625 01
mDb
i
mmEDiatE
cHaNgE
The amount relative to a selection is generally cashed
after the machine has sent the “Successful selection”
signal.
If you enable this function, which is disabled by default,
the cash signal is sent at the start of the dispensing
cycle.
The setup of this parameter is compulsory.
D
Ecimal
poiNt
positioN
Press the Enter key
to display the position of the
decimal point, i.e.:
0
decimal point disabled
1
XXX.X (one decimal digit after the point)
2
XX.XX (two decimal digits after the point)
3
X.XXX (three decimal digits after the point)
If you press the Enter key
, these values will flash on
and off and they can be modified.
The setup of this parameter is compulsory.
b
ookiNg
timE
To set up how long the machine displays the residual
credit necessary to dispense the selection (7 seconds
by default).
t
ypE
of
DispENsiNg
.
To set the operation mode by multiple or single dispens
-
ing. In case of multiple dispensing, the change is not
automatically given at the end of a successful delivery,
but the credit will remain available for further dispens
-
ing. If you press the coin return button (if the function is
enabled), the remaining credit will be returned up to the
maximum change value.
o
bligatioN
to
buy
To enable/disable the operation of the coin return button
before dispensing a product.
-
ON: the change is returned after having selected a
product
-
OFF: the change is returned just after having pressed
the coin return key (the machine is acting as a coin
changer)
m
aximum
crEDit
Use this function to define the maximum accepted credit
for inserted coins.
m
aximum
cHaNgE
You can set a limit on the total amount of the change
the coin mechanism will pay as soon as you press the
change button or after one single dispensing.
The credit exceeding the amount you have programmed
by this function will be cashed.
c
oiNs
accEptED
To define which coins shall be accepted among those
recognised by the validator when the change tubes are
full.
For the coin/value correspondence check the coin
mechanism configuration.
c
oiNs
rEturNED
To define which coins shall be used to give the change
among those available in the tubes. This parameter is
active only with the coin mechanisms not intended to
manage the choice of the tube in use automatically (Auto
changer payout).
For the coin/value correspondence check the coin
mechanism configuration.
b
ills
accEptED
To define which bills shall be accepted among those
recognised by the reader.
For the bill/value correspondence check the reader
configuration.
c
oiNs
accEptED
for
Exact
cHaNgE
To define which coins shall be accepted among those
recognised by the validator when the machine is in the
“exact amount” mode.
For the coin/value correspondence check the coin
mechanism configuration.
b
ills
accEptED
for
Exact
cHaNgE
To define which bills shall be accepted among those rec
-
ognised by the reader when the machine is in the “exact
amount” mode.
For the bill/value correspondence check the reader
configuration.
c
asHlEss
privatE
To protect the users’ privacy, this function is intended to
display the string “-----” in the place of the credit on the
cashless system.
r
EsiDual
crEDit
You can decide whether to cash any credit exceeding
the selection amount after a well-defined time interval
(deleted later) or to leave it at the user's disposal (main
-
tained).
