© by N&W GLOBAL VENDING S.p.A.
18
05-2015 3625 01
fIrsT power-oN
As soon as you power on the device, electronics checks
the configuration of the device.
If you close the machine door:
-
it shows the message that photocells are arranged to
detect the product dispensing cycle (optional)
-
it checks and shows the number of trays and connect
-
ed motors
-
it shows the message that a device is arranged to lock
the compartment opening (optional).
-
it shows the internal temperature detected by the
probe.
r
Efill
coDE
(
if
rEquirED
)
The “refill code” is a 4-digit code used to reset the coun
-
ters that manage the signalling of "ending products".
total aUto reFIll
enter the code
[- - - -]
Enter the “refill code” (1234 by default) to reset the
counters and set the machine to the "normal operation
mode".
As an alternative, press key
�
or the device will switch
to the "normal operation mode" without resetting the
counters if no key is pressed within the span of 1 minute.
The display shows the message requiring the user to
select a product in the normal operation mode.
attention !!!
wait until you reach the operation temperature be-
fore introducing any product to be dispensed.
The manufacturer disclaims all responsibility for
any damage caused by the non-observance of the
precaution mentioned above.
oPERaTIoN
NoRMal oPERaTIoN MoDE
The machine is set to the normal operation mode when
the machine is electrically supplied and the glassfront is
closed.
The glassfront is lit up and the display shows the mes
-
sage requiring the user to select a product.
Messages can be displayed in a double language, ac
-
cording to the set-up:
If the machine has a payment module - by inserting
coins - or a cashless payment system, the credit still
available will appear on the display.
Dial the number corresponding to the product you wish
by using the numeric keyboard.
At the end of the dispensing cycle, the message re
-
quiring the user to take the product will appear on the
display for some seconds and the machine will get ready
for another delivery.
If the control system should find out a failure, an error
message will appear and specify the type of problem.
sTaNDaRD TRays
To dispense a product included in a spiral compartment:
-
the motor intended to rotate the spiral is activated
-
the spiral will push the product forwards and let it drop
into the tray.
DIsPENsINg CoMPaRTMENT loCk
Some models are complete with a device intended to
lock the dispensing compartment that is electrically
released after a dispensing cycle (see the compartment
lock parameters) to open the compartment manually to
take the dispensed product.
The dispensing compartment lock is an alternative to the
motorised compartment.
If you should open the compartment for any reason
whatsoever in case of a power failure, act as follows:
-
remove the last tray;
-
remove the vandal-proof grid;
-
operate the lock device manually.
