NAiS GT10, Technical Manual

Page: 68 / 195

GT10/GT30 4.2 Connecting the FP0
45
4.2 Connecting the FP0
4.2.1 Connecting to the COM. Port
FP0 communication format settings
GT30
Loose–wire connection
FP0 COM. port
GT10
System register no. Item Value Set System register value
412 Selection of target
use of RS232C port
Computer link K1
413 Data length 8 bits K3
Parity check Yes
Parity setting Odd
Stop bits 1 bit
Line return code CR
Start code No STX
414 Baud rate setting 19200 bits/s H0 * 00
415 Unit number 1 K1
416 Modem connection No connection H0
Connecting to the FP0 COM. port
GT10/GT30
FP0
S SD
R RD
G SG
PLC side
Pin no. Abbreviation
SD SD
RD RD
RS RS
CS CS
GND GND
GT main unit side
Pin no. Abbreviation
CAUTION
Because loose wiring is used for connection to the FP0 COM. port, no
dedicated cable is available. The cable should be provided by the
←
To set 19200 bits/s
for both the COM.
port and the TOOL
port, “H0100”
should be set.