NAiS GT10 Technical Manual Download Page 13

Page: 13 / 195

GT10/GT30 Usage Procedures

GT10/GT30

xii

7. Install the screen creation tool.

page 149

Install the Terminal GTWIN screen creation tool in the personal computer. Follow the

instructions on page 149 and subsequent pages to install the software.

8. Create the screen contents.

Create the screen contents using the Terminal GTWIN screen creation tool, and send

the screen to the GT main unit. For information on creating screens and on operating

GTWIN, please refer to the Help function that comes with GTWIN.

9. Test the operation.

Connect the GT main unit containing the screen data to an external device (PLC or

general–purpose serial device), and check the operation contents.

Summary of Contents for GT10




































































































































































































Search results

Summary of Contents for GT10

Reviews:

Related manuals for GT10

Brands by name

Popular brands

NAiS GT10, Technical Manual

Search results

Summary of Contents for GT10

Reviews:

Related manuals for GT10

Brands by name

Popular brands