NAiS GT10, Technical Manual

Page: 126 / 195

GT10/GT30 6.2 Entering Configuration Settings with GTWIN
103
Device Setting dialog box
The button functions as a backspace
key when entering addresses.
The button acts as a Clear key.
Click on the button to display the pull–down
menu, and select the device from that menu.
Enter the address using the ten–keys.
Transfer Outside
Clock data displayed in the GT30 can be transferred to an external device such as a
PLC, using this setting.
Off ––– The GT30 clock data is not transferred to an external device.
On ––– The GT30 clock data is transferred to an external device.
If “On” is selected for the above “Transfer Outside” parameter, click on the button
to specify the output destination and the initial device, and specify the address.
Data storage sequence for internal PLC device
Upper byte Lower byte
Top address Minutes data (H00 to H59) Second data (H00 to H59)
Top a1 Day data (H01 to H31) Hour data (H00 to H23)
Top a2 Year data (H00 to H99) Month data (H01 to H12)
Top a3 — Day data (H00 to H06)
*In the day data, H00 indicates Sunday and H06 indicates Saturday.
CAUTION
If “On” is selected for the “Transfer Outside” parameter, the data will
be transferred to the DT90054 as the default device. If this device
address does not exist in the PLC connected to the GT30, however,
re–specify the address so that it matches the model connected to the
GT30.
Selecting a device address that does not exist in the PLC will cause an
error (ER61) to occur.
Backlight control
Auto–Off
This is used to specify the Auto–Off backlight feature.
Off ––– The Auto–Off backlight feature is not used.
On ––– Auto–Off backlight feature is used. This parameter specifies the period of time
that the GT30 is inactive before the backlight goes off automatically.