NAiS GT10, Technical Manual

Page: 66 / 195

GT10/GT30 4.1 Connecting the FP–Sigma
43
CAUTION
Because loose wiring is used for connection to the FP
Σ
COM. port, no
dedicated cable is available. The cable should be provided by the
customer. When purchasing a cable, the following precautions should
be observed:
Shielded wire with a size of AGW#28 to 16 (conductor
cross–section surface area: 0.08 mm
2
to 1.25 mm
2
) should be used
for connections.
For wiring procedures, please refer to “Wiring the COM. Port” on
page 23.
4.1.2 Connecting to the TOOL Port
AIGT8192
GT10
FP
Σ
TOOL port
GT30
FP
Σ
communication format settings
System register no. Item Value Set
410 TOOL Port
Unit number
1
412 Modem connection No modem connection
413 Data length 8 bits
Parity check Yes, Odd
Stop bits 1 bit
Line return code CR (Fixed)
Start code no STX (Fixed)
415 COM. Port 1
Communication speed setting
19200 bits/s