NAiS GT10 Technical Manual Download Page 168

Page: 168 / 195

GT10/GT30

9.4 GT10 Screen Messages

145

9.4

GT10 Screen Messages

In addition to screen data, the GT10 also displays the following messages.

When transferring data from personal computer to a GT10

This is displayed when data is being transferred from the computer to the GT10.

When transferring data from GT10 to a personal computer

This is displayed when data is being transferred from the GT10 to the computer.

When there is no base screen data

This is displayed when there is no base screen data. (It is displayed even if the

configuration data has been sent.)

When the specified screen does not exist

This is displayed in cases such as when there is no data for a specified screen number.

(For detailed information, see page 136.)

When the screen memory is full

This is displayed if the internal user memory (F–ROM) is full.

Summary of Contents for GT10




































































































































































































Search results

Summary of Contents for GT10

Reviews:

Related manuals for GT10

Brands by name

Popular brands

NAiS GT10, Technical Manual

Search results

Summary of Contents for GT10

Reviews:

Related manuals for GT10

Brands by name

Popular brands