Nachi EZ-CFDL Series, Instruction Manual

Page: 64 / 84

5.2Ethernet setting
5.2.2 FTP setting
FTP Settings
1 Select <Constant setting> –
[
8 Communication] – [2. Ethernet] – [3 FTP].
>> Following setting screen will appear.
2 Set the required parameter referring to " Table 5.2.3 FTP setting ".
3
When the setting is completed, press f12 <Complete>.
4 To enable the new settings, restore the power of the robot controller.
Table 5.2.3 FTP setting
Parameter Description
FTP service Sets whether to enable [FTP service function] of this controller. When it is enabled
and controller power is turned on, FTP service will be started. When it is disabled,
FTP service from the FTP client for this controller will be stopped.
Anonymous
Account Sets the authorization of anonymous connection. When [Only Allowed] is set, the
user will not be able to log on with his/her user name and the password. The
account that has the administrative access right will be prevented from accessing it,
but only the account specified as an anonymous access can access it.
Connectable
number Sets the maximum connectable number to one server at the same time. The
number can be from 16 to 1000.
Timeout period Sets the time to disconnect the inactive user from the server on the second time
scale. The timeout period can be set in the 0 to 900 seconds. This value enables
FTP protocol to close all the connection even when it fails.
FTP home
directory Sets the directory path to be used for FTP service. The directory path can only be set
to directories under “D:¥”. The directory path cannot be set to any other directories.
Directory
Permission When “Write only” or “Read/Write” are selected, to write a file from a client to an FTP
server is permitted. This setting is only for the directory to receive files from users.
FTP login message Is displayed on the client connected to the FTP server for the first time.