Nac Hi-Moiton II, Quick Manual

Page: 49 / 71

49
MENU (2/2)

AUTO IRIS SET
IRIS SET MODE
OFF, ON
Setting for ON/OFF of each Auto Iris Control.
IRIS LEVEL SET
-100 - +100
Setting for Auto Iris Range.
PEAK RATIO SET
-100 - +100
Setting for Iris Correction when the Contrast is high.
IRIS GAIN
1 - 100
Setting for Iris Response Sensitivity.
IRIS SPEED
1 - 100
Setting for Iris Response Speed.
IRIS LIMIT
F22, F20, F18, F16
Setting for Iris Limit Value in close direction when in Auto Iris Mode.
LENS ADJUST
OFF, F2.8, F16
Setting for Control Voltage Output of Lens Iris Adjustment.

AUTO SETUP MODE
AWB WITH A.IRIS
ON, OFF
Setting for ON/OFF of Auto Iris Control when AWB performed.
AWB REFERENCE
ON, OFF
Setting for validity of AWB converge value.
REFERENCE SET
AWB, ABB
Performing this command after desired B/W setting stores the R/G and B/G
as Reference.
Note: DIP-SW must be set with the Camera Head prior to this change.

SW ASSIGN
RET-1 (HANDLE)
RET-1, ZOOM-, FOCUS-, NONE
Assigns the selected functions on RET-1 (HANDLE).
RET-2 (HANDLE)
RET-2, ZOOM+, FOCUS+, NONE
Assigns the selected functions on RET-2 (HANDLE).
ZOOM SPEED
1 - 100
Setting for Zoom Speed when RET1 and 2 is assigned for.
FOCUS SPEED
1 - 100
Setting for Focus Speed when RET1 and 2 is assigned for.
RET (LENS)
OFF, RET-1, PROD MIC, ENG MIC, ENG+PROD MIC, TRIG, VF OUT,
VF CHAR
Assigns a function when pressing the RET button on an ENG lens.
VTR (LENS)
OFF, PROD MIC, ENG MIC, ENG+PROD MIC, TRIG, RET-2, VF OUT,
VF CHAR
Assigns a function when pressing the VTR button on an ENG lens.