Nac Hi-Moiton II, Quick Manual

Page: 33 / 71

33
6 Press MENU button to complete the settings.
D When VAR1 VAR2 VAR3 buttons are pressed, the image clip is played back
according to the FPS Setting value stated on the below of the each buttons.(Refer to the
following settings) It ranges from -1200 to +1200. It means Play in Backwards when all dots
of 4 digits blink.
How to change each VAR Settings
1 Check 1 button of the CUE MODE SEL button’s light is On on the top of the Slow Controller.
2 If the 1 button’s light blinks, press either 1 or ESC button to make it On.
3 Press MENU button.
4 Press
7(↑) 4(↓) buttons as you see on the display of the Slow Controller and select
>CONSOLE, then press ENT button.
5 Press
7(↑) 4(↓) buttons and select each VAR-1 / VAR-2 / VAR-3.
6 Press 5(-) 6(+) buttons and select value, and press ENT button to confirm.
7 Press MENU button to complete the settings.