Nac Hi-Moiton II, Quick Manual

Page: 32 / 71

32
C For T-Bar control after VAR button is pressed, the image clip can be played back
according to the desired T-Bar position. For T-Bar playback speed, the playback stops at
End position and it plays back with T-Bar Top Speed at Top position.(Refer to the following
settings)
How to change T-Bar Top Speed Settings
1 Check 1 button of the CUE MODE SEL button’s light is On on the top of the Slow Controller.
If the 1 button’s light blinks, press either 1 or ESC button to make it On.
2 Press MENU button.
3 Press
7(↑) 4(↓) buttons as you see on the display of the Slow Controller and select
>CONSOLE, then press ENT button.
4 Press
7(↑) 4(↓) buttons and find Hi2TbarPtn.
5 Press 5(-) 6(+) buttons and select the followings, and press ENT button to confirm.
・
PLAY 0.5x 0.5x faster than PLAY REF SPEED
・
PLAY 1.0x 1x faster than PLAY REF SPEED
・
FRAME 1x 1x faster than FRAME RATE
・
FRAME 2x 2x faster than FRAME RATE