Nac Hi-Moiton II, Quick Manual

Page: 35 / 71

35
9.7 CUE / SEARCH
A When CUE button is pressed during recording, it memorizes the position of the time and
the time can be called easily in playback.
B When SEARCH button is pressed, it jumps to the last CUE point in the selected Block,
and to the next CUE point with a second press. Every SEARCH press jumps back to the
former CUE point and once it reaches to the first CUE point in the selected Block, it jumps to
the last CUE point of the Block.
C Pressing
 
buttons instead of pressing SEARCH button jumps to the CUE points
between Blocks.
D CUE point can be assigned max. 10 points per a Block.
E PREROLL Setting is available (Refer to the following settings).
Pressing either one of PREROLL 1 PREROLL 2 PREROLL 3 buttons on the top of
the Slow Controller as each light is On, pressing SEARCH button or
 
buttons
jumps by offsetting the second of 3 digits that are set (0.1sec) to the past. Press each button
that is lit On again to release PREROLL function.
How to change each PREROLL Settings
1 Check 1 button of the CUE MODE SEL button’s light is On on the top of the Slow Controller.
If the 1 button’s light blinks, press either 1 or ESC button to make it On.
2 Press MENU button.
3 Press 7(
↑) 4(↓) buttons as you see on the display of the Slow Controller and select
>CONSOLE, then press ENT button.
4 Press
7(↑) 4(↓) buttons and select each Hi2Preroll-1 / Hi2Preroll-2 / Hi2Preroll-3.
5 Press 5 (-) 6(+) buttons and select value, and press ENT button to confirm.
6 Press MENU button to complete the settings.