Nac Hi-Moiton II, Quick Manual

Page: 25 / 71

25
8.7. Other functions and operations of OCP
A Color Space Setting for SMPTE / EBU / ITU-709
① .
How to change with OCP
Press SET UP on the OCP and go to COLOR , Matrix on the touch screen menu.
Select one from EBU, SMPTE, or ITU with a rotary encoder under Matrix Select .
② .
How to change with HEAD MENU
Select one from ITU / EBU / SMPTE / OFF at MATRIX of PROCESS MODE in MENU(1/2) of the
HEAD MENU.
B How to use AUTO SET UP
Press SETUP switch on the LCD display and press AUTO SET UP to show the following display.
When using the Hi-Motion II, functions and operations of each button are as follows.
・
Full (Full Auto Setup) Enables Auto White Shading
・
Level (Level Auto Setup) Invalid ( “STOP” is displayed on VF)
・
Full Quick (Full Quick Auto Setup) Invalid (beep)
・
Quick (Quick Auto Setup) Invalid ( “Stop” is displayed on VF)
・
Black Shade (Auto Black Shade) Enables Auto Black Balance
・
Skin Hue (Auto Hue Detect) Invalid ( “STOP” is displayed on VF)
C How to adjust MASTER PED reference value
MASTER PED value returns to “0” (zero) after ABB, as default. If you want to set it other than “0” (zero),
adjust the MASTER PED value first. Then press MAINTE button on OCP and REF.SET button to
display ABB button. Keep pressing the ABB button until beep and press START button. When both
ABB and START buttons turn from Yellow to Green, the setup finished. After that the MASTER PED
returns to the set value after ABB.
D Collective stop operation for recording and playing
You perform the following operation to stop all by one operation when performing recording
and playing at the same time.
- Press STOP button of Slow Controller and hold it for a few seconds.
All blocks being on recording or playing become stop status.