Nac Hi-Moiton II, Quick Manual

Page: 22 / 71

22
8.4. Control Knob Portion
① .
Control Knob
・
R/G/B GAIN Control Knob
To control R/G/B gain. G gain control reacts R, B gain control.
・
R/G/B PED/FLARE Control Knob
To control R/G/B of Pedestal or Flare.
Switching of Pedestal/Flare can be done with _FLARE CONT Switch (VR TYPE
）
or PAINT
LOCK Switch (JOYSTICK TYPE).
If center knob is assigned for master flare control, M.FLARE indicator lamp turns on.
The selection of Master Flare or G.Flare can be done by “Panel Set-up (Panel Config.)
Menu”. If “Auto” mode is selected, it activates either “Master Flare” for the camera has
Master Flare function or “G.Flare” for the other camera has not Master Flare function.
・
KNEE POINT/SLOPE Control Knob
To set KNEE SLOPE and KNEE POINT by manual (hand).
・
DTL/GAMMA Control Knob
To set DTL level and MASTER GAMMA level.
② .
FLARE CONT Switch (VR TYPE)
To set R/G/B PED/FLARE Knob for Pedestal control or Flare control. LED and this switch
lights in case of Flare control mode.
③ .
PAINT LOCK Switch (JOYSTICK TYPE)
If this switch is pressed to ON,
①
all Control Knobs are inhibited and Control Knob rotation
doesn’t affect. If this switch pressed to OFF, Inhibit of Control Knob is released without data
jump regardless the Knob position.
By pressing this switch while pressing KNOB FREE Switch, R/G/B PED/FLARE Control
Knob can be set Pedestal Control or Flare Control. LED lights when the switch is set to Flare
Control.