Nac Hi-Moiton II, Quick Manual

Page: 30 / 71

30
4 Press ENT button to complete the settings.
E When STOP button is pressed, the Block Recording stops as END Trigger Mode even in
whatever the Trigger Mode is selected, and the Block does not jump to the next Block
Recording even in CONTINUOUS or LOOP Mode. (Refer to Chapter 9.3 F)
F Recording Mode has three types; SINGLE, CONTINUES and LOOP. In SINGLE Mode,
it only records in a Block and does not jump to the next Block Recording. In CONTINUES
Mode, it jumps to the next Block Recordings every time REC button is pressed and ends
after one round of all the divided Block (For example, if the Blocks are divided as 4 Blocks
and started with the 3rd Block, it ends at the 2nd Block after one round).
In LOOP Mode, it jumps to the next Block Recordings every time REC button is pressed,
and it continues until STOP button is pressed. When in CONTINUES or LOOP Mode, the
Blocks that are being in LOCK and PLAY will not be overwritten. (Refer to Chapter 9.5)
1 How to change Recording Mode Settings.
2 SINGLE, CONTINUES, LOOP mode changes every time 0 button is pressed.
3 Status of 0 and Display of PM2 output at each Mode.
・
SINGLE Mode No light on 0 (S displays at the lower left on PM2 output)
・
CONTINUOUS Mode Light On on 0 (C displays at the lower left on PM2 output)
・
LOOP Mode Light Blinks on 0 (L displays at the lower left on PM2 output)
4 You can confirm even the block recording mode of the LCD indication section of the slow
controller. “ S ” : SINGLE / “ C ” : CONTINUOUS / “ L ” : LOOP