MV Agusta Rivale 800, Workshop Manual

Page: 86 / 456

- 70 -
Maintenance
B
“QUICK SHIFT” mode
- Press “SET” in order to access to “ QUICK SHIFT ”
mode. The display shows the current activation state
of the “quick shift” function of the gear change
(“ON”:
activated; “OFF”: not activated).
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. Do not change the display while
driving.
- Press the "OK" button for less than three seconds;
the activation caption of the “quick shift” function
begins to flash.
- By pressing the "OK" button for less than three sec-
onds, the caption toggles from “OFF” to “ON” and
inversely.
- Press “SET” to confirm the selected “quick shift” acti-
vation state.
- Otherwise, by pressing “OK” while the caption is still
blinking, “ABS OFF” appears on the display.
- If you do not press any button, after three seconds
the “ABS OFF” selection is confirmed; under this con-
dition, the ABS system is deactivated. Press “SET” to
exit the “ABS” mode.
WARNING
When the ABS system is deactivated, the
related warning light on the dashboard
turns on. From this moment on, the antilock
braking system is not available when brak-
ing. Adopt a cautious driving style and ride
at low speed in order to avoid losing control
of the vehicle during emergency brakings.