MV Agusta Rivale 800, Workshop Manual

Page: 227 / 456

POSITIONING OF ELECTRICAL SYSTEM WIRE CLAMPS RIVALE 800
Electrical system
- 47 -
E
LIST OF FASTENING CLAMPS FOR RIVALE 800 ELECTRICAL SYSTEM CABLES
Code Qty. Length Name
800092248 12 L = 82 mm Rubber clamp L 82
800092247 11 * L = 62 mm Rubber clamp L 62
800053724 18 L = 39 mm Rubber clamp L 39
800092668 7 L = 25 mm Rubber clamp L 25
800092661 16 L = 92 mm Plastic clamp for cables
800056783 3 L = 142 mm Plastic clamp for cables
800056444 6 L = 188 mm Plastic clamp for cables
(*) Add q.ty 1 clamp Cod. 800092247 - L = 62 for wire harness up to Rev. B
To correctly position the electric wiring on
the motorcycle, first position the initial node
of the wiring in correspondence with the
fixed right plate of the frame, as shown in
fig. 01.
For the position of the clamps for fastening
electrical system Rivale 800 cables, refer to
the layout shown below (see figs. 02-35).
Note: Pay attention to the
correct passage of the
overflow pipe
Note: Contains both
wiring branches
Code
Code
Code
Note: Hide the over-
flow pipe behind the
frame tube
Note: Keep
the wiring at
a distance
from the
head of the
screw