MV Agusta Rivale 800, Workshop Manual

Page: 427 / 456

Cooling system
- 35 -
L
FILLING THE COOLING SYSTEM
Position the motorcycle on the side stand.
Fill the cooling system with the required liquid
described in the table (see page B-8) up to the level of
the radiator fill cap. Carry out the operation several
times until the level of the liquid is stable.
If possible tilt the motorcycle to the right
to take the radiator cap into the highest
position to facilitate the escape of the air.
Close the cap and bring the motorcycle back to a ver-
tical position on the central stand.
Fill the expansion tank up to the "MIN" level.
If filling must be performed on the motorcycle with the
tank mounted, this operation is easier using a syringe
through the side loading hole.
Turn the handlebar to the left to free the loading zone.
Remove the side loading screw-on cap.
Insert the hose connected to the syringe in the loading
hole and load the required amount of coolant.
NOTE