MV Agusta Rivale 800, Workshop Manual

Page: 217 / 456

Electrical system
- 37 -
E
FRONT TURN INDICATORS INDICATOR AND SIDE
LIGHTS
In the event that turn indicators do not work, check the
conditions of fuse
6 on the fuse box.
If the condition is met, check the intermittence control
unit connector positioned under the right side panel.
Remove the intermittence control unit connector and,
with the key in
ON position, check that there is battery
voltage between pins 6 and 12 and between 6 and 5 .
Now, holding the left indicator command, check the
continuity between pins
6 and 3 ; operate in the same
way on pins 6 and 2 with the right indicator command.
If the condition is also met, the problem originates from
the indicators.
Now check the continuity between the Green/Black
cable of the right lights connector and the Green/Black
cable of the control unit connector. Operate in the same
way on the left side between the Pink/Blue cable of the
lights connector and the Pink/Blue cable of the control
unit connector. If these conditions should also occur,
the problem originates from the light units.
To replace the side and stop lights, remove the three
screws (
1 ) inside the side panel.
1