MV Agusta Rivale 800, Workshop Manual

Page: 260 / 456

Fork assembly check
Check that the sleeve does not have marks on the
external part that could have repercussions inside the
assembly. Ensure that the inside is completely smooth,
without any scratches.
If necessary, substitute with a new part.
Check for marks or scratches on all surfaces of the
stem and check the condition of the chroming.
Measure the length of the spring and compare
with the following values:
-
Rivale 800: 330 mm
To replace the bushings inside the sleeve, operate
using the required tool in accordance with the method
described in the diagram.
Special tool No. 8000B6785
Suspension and wheels
F
- 16 -
Assembly oil seal and anti-dust seal
After having carefully checked all components, substi-
tute those damaged and/or deteriorated.
Grease the lips of the new anti-dust seal (
1 ) and the
new oil seal ( 2 ) with the appropriate grease.
Recommended grease: MOLYKOTE 55M
Make sure that the bushings ( 3 ) and washer ( 4 ) placed
against the oil seal are inside the sleeve. Proceed with
re-assembly of the oil seal using the required tools.
Special tool No. 8000B6785
Install the dust seal and oil seal on the stem.
1
2
Visually check for scratches and marks on the pump
rod and check that it slides smoothly inside the pump
unit without chamfering.
Substitute if necessary.
4
3