MV Agusta Rivale 800, Workshop Manual

Page: 72 / 456

- 56 -
Maintenance
B
Selecting and setting the display functions
Some of the main measurements of the instruments
may be changed.
The available options include:
- Select an operating mode:
“RUN” (Odometer)
“SPEED LIMITER”
“TC” (Traction control)
“CHRONO” (Chronometer)
“ABS” (Antilock braking system)*
“QUICK SHIFT”
“CLOCK” (Clock)
- Reset the trip counter:
Trip counter 1 “TRIP 1”
Trip counter 2 “TRIP 2”
- Turn on the chronometer
- Clock settings
- Control unit mapping selection
Selecting the display functions
The following settings may be changed on the display:
• “RUN” (Odometer)
• “SPEED LIMITER”
• “TC” (Traction control)
• “CHRONO” (Chronometer)
• “ABS” (Antilock braking system)*
• “QUICK SHIFT”
• “CLOCK” (Clock)
To display the operating modes, press “SET” for less
than
three seconds. When pressed, the display shows
all modes, in a sequence. Select the desired mode.
WARNING
The operation must be performed while the
engine is not running, the gears are in neu-
tral, the motorcycle is stationary, and with
the feet on the ground. Do not set the dis-
play functions while riding, except where
otherwise indicated.
(*): This function is present only on certain models