MV Agusta Rivale 800, Workshop Manual

Page: 79 / 456

Maintenance
- 63 -
B
Chronometer
Lap time recording
- Turn on the chronometer (“CHRONO” mode) to
record the time taken to cover a lap.
- Press the headlight button to start recording the time.
The colon that separates the minutes from the sec-
onds and from the tenths of a second will start blink-
ing. Now, the instrument is recording the time.
NOTE: When the “CHRONO” mode is acti-
vated, the first pressing of the headlight but-
ton automatically enables the “TC” function.
From this moment on, it is possible to
immediately change the traction control
level by properly operate the “SET” and
“OK” buttons.
- Press the headlight button again to record the time
taken to cover the 1st lap. At the same time, the
instrument starts recording the time taken to cover the
second lap.
The time measurement for the first lap is stored in the
memory and is visualised on the display for ten sec-
onds, after which the time measurement for the follow-
ing lap appears.