MUTOH Toucan Hybrid PJ-162-FE, User Manual

Page: 113 / 251

User’s Guide – Toucan Hybrid
113 AP-750, Rev. 1.1 –- 23/04/04
5.3.3 Precaution on storing media
When storing media, pay attention to the following.
Notes :
Store media away from high temperature, high humidity, or direct sunlight.
Unused roll media must be removed from the scroller, rewound tightly, and stored in the
original wrapping bag and the box.
Do not wet media.
Stored media has same temperature as the printer when optimized conditions are
wanted.
5.3.4 The printing area
Printing areas of each media with the printer are as shown below.
Roll-to-roll Rigid
a 100 mm 0 mm
b 25.4 mm 25-125 mm
c 0 mm ~ 50 mm 0 mm ~ 50 mm
d 25.4 mm 25 mm
Notes :
Printing margin C of the media feed direction is preset at the factory to 0mm as the initial
value. To change the printing margin C, reset it by following the steps in "Menu setup on
the operation panel".
Set the continuous printing item to "ON".
→
Refer to “Joint printing menu”
Change the value in the continuous margin item.
→
Refer to “Joint margin menu”
Printing margin A of the media feed direction becomes 0 mm automatically for following
cases.
When the continuous printing is set as "ON".
→
Refer to “Joint printing menu”