MUTOH Toucan Hybrid PJ-162-FE, User Manual

Page: 15 / 251

User’s Guide – Toucan Hybrid
15 AP-750, Rev. 1.1 –- 23/04/04
Be sure to use the attached cable. Otherwise, electrical shock or fire may occur.
Be sure to use the specified voltage (AC 100 V- 120 V or AC 220 V - 240 V). Otherwise, electrical shock
or fire may occur.
Use electricity directly from a power outlet (AC 100 V- 120 V or AC 220 V - 240 V). Do not put many
loads on one electrical output. Otherwise, heat may be generated and cause fire.
Be sure to use an outlet with an earth terminal and use the terminal correctly. Otherwise, electrical
shock or fire may occur.
The ink used in this product contains an organic solvent (CYCLOHEXANONE). Make sure to follow the
industrial waste disposal laws and ordinances of your local governments. It is necessary to install a local
ventilation unit, a push/pull type ventilation unit, or a total ventilation unit to perform adequate ventilation.
If ink or jetwash liquid is swallowed, do not make the person throw up, but immediately call a doctor and
a poison management centre. If there is contact with eyes or inhalation, it may cause irritation. Follow
the cautions and procedures labeled on the ink and jetwash bottles, and take action immediately.
Follow the instructions below when handling the power cable.
•
Do not modify the cable
•
Do not put heavy objects on the cable
•
Do not bend, twist, or pull the cord
•
Do not wire the cable near equipment that generates heat
Follow the instructions below when handling the power plug. Otherwise, fire may occur.
•
Wipe away dust and any other residue before inserting the plug.
•
Ensure that the plug is firmly inserted as far as it will go.
When handling the foot switch, be wary of the following:
•
Do not place anything heavy on the foot switch
•
Do not bend the cable of the foot switch with force, and do not pull.
•
Do not place the foot switch near thermal devices.
When opening/closing the maintenance cover, be careful not to get fingers caught in the lid.
Be careful not to pinch your fingers between rigid media and the media tray
When moving the media, be careful not to pinch your fingers between the flat stand roller and the media
tray
The refilled ink or jetwash liquid must not exceed the upper limit (about 2 liters) of the main tank. If it
exceeds the upper limit, the ink will leak out and will cause printer problems.
When filling the main tank with ink, make sure not to make a mistake with the ink colour and the ink tube
colours. Filling the tank with wrong colour ink can make the print head useless.
During printing in roll mode, do not touch the media guide. The media guide is hot, and may cause burns
if touched.
During the winding operation, make sure to keep hands and fingers clear of moving parts.
Take extreme caution not to have your fingers pinched in the drive when moving the media.
When cutting the roll media, be careful of the following. Incorrect handling can result in injury to hands
and fingers from the blade.
•
When holding the media, do not place fingers over the media cut groove.
•
Move the blade slowly along the media cut groove.