MUTOH Toucan Hybrid PJ-162-FE, User Manual

Page: 29 / 251

User’s Guide – Toucan Hybrid
29 AP-750, Rev. 1.1 –- 23/04/04
9 Maintenance cover This is a cover to protect the user from the internal components of the
product. This is opened during the following conditions:
When turning the unit ON or OFF
When cleaning the print head surface.
When cleaning the print head inside the cover, there is a waste fluid tray
to collect waste fluid from the print head.
10 Waste fluid tank A tank for storing waste fluids discharged from the product.
11 Waste fluid valve Opened when discharging waste fluid from the waste fluid tank. This is
normally closed.
12 Stand This stand is used to install the printer on a flat surface.
13 Winding unit Winds and collects the printed media.
14 Memory cover This is a cover to protect the user from the internal components of the
product. The cover is opened when changing the expansion memory. This
is normally closed.
15 Cushioning roller Use to guide the printed media to the take-up mechanism.
16 Front stand fixing block This is used to fix the front stand 1 on the printer body.
17 Lifting grip This is used to lift or lower the media guide.
18 Head gap adjusting
handle
This is used to lift or lower the print head.
19 Head gap counter This indicates the head gap between the print head and grid roller.
20 Head gap sensor lamp This is used when adjusting the head gap. If the print head touches the
media due to narrower head gap, this lamp (green) lights up.
21 infrared lamp The infrared lamp is connected with the carriage. During printing on rigid
materials it assists to fix ink onto the material. (up to 150°C)
22 Emergency stop Only to be used in case of great malfunction and danger.
23 PCB Contains the IR board