MUTOH Toucan Hybrid PJ-162-FE, User Manual

Page: 104 / 251

User’s Guide – Toucan Hybrid
104 AP-750, Rev. 1.1 –- 23/04/04
Notes:
For printing, refer to the following.
→
Refer to “Test printing”
To do the Alignment, follow the steps below.
Step 1 :
Turn the power of the unit ON, and set the media.
Step 2 :
Perform accuracy adjustment printing for alignment according to "Test printing".
•
When performing Uni-directional printing: Alignment (for the Uni-direction printing)
•
When performing bi-directional printing: Alignment (for the Uni-direction printing and the
bidirectional printing)
Step 3 :
From the printing sample "Pattern A", select the number with the slightest deviation.
Step 4 :
Press either the [F2] key or [F4] key to select the number for the line you choose in the previous
step.
PatternA (Uni – D)
1~7 +
←
F2
4 -
←
F4
F2, F4
→
ENTER
Step 5 :
Press the [Enter] key on the operation panel to register the “Head A” setting value.
Step 6 :
Repeat the steps from 3 to 5 to register all settings for each head.