MUTOH Toucan Hybrid PJ-162-FE User Manual Download Page 5 | Manualshive

Page: 5 / 251

MUTOH Toucan Hybrid PJ-162-FE User Manual Download Page 5

User’s Guide – Toucan Hybrid

5

AP-750, Rev. 1.1 –- 23/04/04

Important Notice

This product has been tested and found to comply with the limits of a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the product is operated in a commercial environment.

This product generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with this manual, may cause harmful interference to radio communications. Operation of this
product in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

1. Radio interference

Product generates weak radio signals and may interfere with television reception and utilities. If a product
does interfere with radio or TV reception, try the following:

  Change the direction of your radio and TV reception antenna or feeder.
  Change the direction of the product.
  Move either the product or the receiving antenna so there is more distance between them.
  Be sure the product and the receiving antenna are on separate power lines.

2. Trademarks mentioned in this manual.

MUTOH, PJ-162-FE, Toucan Hybrid, MH-RTL are registered trademarks or product names of MUTOH

INDUSTRIES LTD.

Centronics and Bitronics are registered trademarks or product names of Centronics Data Computer

Corporation.

Windows95, Windows98, Windows NT4.0, Windows2000, and MS-DOS are registered trademarks or

product names of Microsoft Corporation.

DOS/V is registered trademark and product name of International Business Machine Corporation (IBM).
Other company and product names may be registered trademarks or product names.

Caution :

No part of this product or publication may be reproduced, copied, or transmitted in any
form or by any means, except for personal use, without the permission of MUTOH
INDUSTRIES LTD.
The product and the contents of this publication may be changed without prior
notification.
MUTOH INDUSTRIES LTD. has made the best efforts to keep this publication free from
error, but if you find any uncertainties or misprints, please call us or the shop where you
bought this equipment.
MUTOH INDUSTRIES LTD. shall not be liable for any damages or troubles resulting
from the use of this equipment or this manual.

«
...
3
4
5
6
7
...
»

Summary of Contents for Toucan Hybrid PJ-162-FE




























































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands