MultiScree
∂
Channel
Manual Restore
You can restore files from a Flash Disk manually. Generally this will be
performed by an Authorised MultiScreen Service Provider. You should not carry
out this procedure unless instructed to. Note that any changes you have made to
your unit since the last backup will be lost when you perform the restoration.
[a]
Ensure that the USB Flash Disk you wish to restore from is in a USB slot.
Also ensure that no other flash disk is plugged in.
[b]
From the Sequence Editor click on the
Config
button to open the
Configuration Editor.
[c]
Click the button labelled
Backup & Restore
. The Backup & Restore
screen will appear, with a number of options.
[d]
Click the button labelled
Manual Restore
. A message similar to the
following will appear:
"You are about to restore the BackUp information
that was saved at hh:mm:ss on dd-mm-yyyy. This will destroy all of the
information that is currently on this unit, and replace it with the BackUp
information. Are you sure you want to do this?"
[e]
If you do wish to continue with the backup, click
OK
. The following dialog
will appear :-
106