WARNING
Internal loads and residual pressures in the HP fuel system. Risk of flying parts when released.
Risk of pressurized fuel spraying out.
Risk of injury from flying parts and spraying fuel!
• Wait at least 15 mins. to relieve pressure before opening the HP fuel system.
• Only use specified tools and jigs.
• Always wear protective goggles / safety mask.
• Undo threaded connections slowly.
NOTICE
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanliness.
Nameplate
u
The nameplate contains the following infor-
mation:
1. DMC – Data Matrix Code
2. L'Orange part number
3. MTU part number
4. IIG code (Initial Injector Equalization)
5. EMI-ID code
6. Serial number
7. Date of manufacture
Preparatory steps
1.
Allow HP system to cool down.
2.
Close off fuel supply to engine.
3.
Remove cylinder head cover (→ Page 107).
Removing injector, removing
rings
1.
Disconnect cable connector at injector (ar-
rowed).
112 | Injector | MS15058/04E 2018-12
TIM-ID: 0000079050 - 005
Summary of Contents for 20V4000G44F
Page 4: ......
