8.21.4 Engine governor ECU 9 – Removal and installation
Preconditions
☑
Engine is stopped and starting disabled.
☑
Protective cover over connectors on Heavy-Duty version removed.
NOTICE
Wrong engine governor installed.
Engine damage!
• When reassembling an engine, make sure that the governor with the data record for the given engine
is installed.
Removing engine governor from
engine
1.
Note or mark assignment of cables and
plugs.
2.
Remove all screws (2).
3.
Undo clips (3) on connectors.
4.
Remove all male connectors.
5.
Remove screws (1).
6.
Take off engine governor.
Installing engine governor on engine
1.
For installation follow reverse sequence of working steps. Ensure that connectors are plugged in the correct
socket.
2.
Check resilient mounts before installing.
Result:
Replace the resilient mounts if the rubber is perished, or the mounts are otherwise defective.
208 | Accessories for (Electronic) Engine Governor / Control System | MS15058/04E 2018-12
TIM-ID: 0000063846 - 001
Summary of Contents for 20V4000G44F
Page 4: ......
