2 Transport
2.1 Transport
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Crossbeam
T80091826
1
Crossbeam
T80092360
1
DANGER
Suspended load.
Danger to life!
• Use suitable equipment and lifting devices.
• Never stand beneath a suspended load and keep a safe distance.
• Wear personal protective equipment (e.g. protective helmet, safety shoes).
Transport
1.
Install the engine mount locking devices (→ Page 25) and the transport locking device for the engine prior
to transportation (→ Page 22).
2.
Use lifting eyes provided to transport engine/generator (→ Page 21).
3.
Use suitable transport and lifting gear only.
4.
Engine/generator must only be transported in installation position: max. admissible diagonal pull 10°
(→ Page 21).
5.
Remove any loose parts on engine/generator.
6.
Raise and lower engine/generator slowly. Do not allow hoist slings or chains to contact engine/generator or
any of their component parts. Adjust lifting gear as necessary.
7.
For special packaging with aluminum foil: Suspend engine by lifting eyes on bearing pedestal or transport by
means of handling equipment (forklift truck) capable of bearing load.
8.
Secure engine/generator such as to preclude tipping during transport. Secure such as to preclude slipping
and tipping when driving up or down inclines and ramps.
Setting down after transport
1.
Set system down on a firm, flat surface only. The surface must not have any bumps, steps / platforms or
objects lying on it.
2.
Make sure that the consistency and load-bearing capacity of the ground or support surface is adequate.
3.
Never set the engine down on its oil pan unless expressly authorized to do so by MTU.
20 | Transport | MS15058/04E 2018-12
TIM-ID: 0000065840 - 004
Summary of Contents for 20V4000G44F
Page 4: ......
