2.4 Engine mount shipping lock
Preconditions
☑
Engine coolant and engine oil must be filled.
Shipping lock
Note:
The shipping lock protects the engine mount from damage resulting from shock and vibration during engine
transportation.
For installation and removal of the transport locking device, follow the in-
structions below:
1.
Remove the transport locking device from all resilient mounts before putting the engine into operation.
2.
The transport locking device must be installed on all resilient mounts according to the instructions before
transporting.
Removing engine mount trans-
portation locks
1.
Slacken nuts (2).
2.
Undo nut (3) and unscrew and remove screw
(1) together with washers and nuts (2 on
each mount).
3.
Store removed transportation lock parts in a
safe place for later use.
Installing transportation locks
1.
Insert screws (1) together with washers and
nuts (2) (2 on each mount).
2.
Screw on and tighten nut (3).
3.
Tighten nuts (2) evenly in stages against en-
gine mount and base mount.
4.
Tag the engine with “Shipping Lock Instal-
led”.
MS15058/04E 2018-12
| Transport | 25
TIM-ID: 0000076367 - 001
Summary of Contents for 20V4000G44F
Page 4: ......
