Installing the transport locking
device on driving end (KS), ver-
sion B
1.
Secure plate (1) with screws (5) and washers (4) together with cover plate (7) at the bores on both sides of
the flywheel housing and tighten to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M16
Tightening torque
250 Nm +25 Nm
2.
Screw locknut (2) onto screws (3) up to the end of the thread.
3.
Insert holder (8) through opening in plate (1) and secure with screw (3).
4.
Tighten screws (3) alternately to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
M10
Tightening torque
30 Nm +3 Nm
5.
Place locknuts (2) of screw (3) in position on both sides of plate (1) and lock.
6.
Fit sign (6) to mark the engine as “Fitted with transport locking device”.
MS150049/04E 2017-04
| Transport | 21
TIM-ID: 0000040575 - 002
