manualshive.com logo in svg

MTU 12V4000C Series, Operating Instructions Manual

Share
Download
MTU 12V4000C Series Operating Instructions Manual Download Page 140

8.19.5 Battery-charging generator – Drive belt tension adjustment

Preconditions

☑

Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Torque wrench, 60–320 Nm

F30452768

1

Ratchet bit

F30027341

1

Torque wrench, 10–60 Nm

F30452769

1

Ratchet bit

F30027340

1

WARNING

Belt tensioner spring is pretensioned.
Risk of hands being crushed!
• Lock belt tensioner in position.
• Only use specified tools and devices.

Adjusting belt tension

1.

Remove protective cover.

2.

Slacken screws (1) and (2) by half a turn.

Result:

Belt tensioner moves against the drive belt
and tensions it.

3.

Tighten screw (2) to specified torque using a torque wrench.

Name

Size

Type

Lubricant

Value/Standard

Screw

M10

Tightening torque

60 Nm +5 Nm

4.

Tighten screw (1) with a torque wrench.

5.

Install protective cover.

140 | Battery-Charging Generator | MS150049/04E 2017-04

TIM-ID: 0000071474 - 001

Summary of Contents for 12V4000C Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands