2.3 Crankshaft transport locking device
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 10–60 Nm
F30452769
1
Torque wrench, 60–320 Nm
F30452768
1
Engine oil
Note:
The transport locking device on both sides protects the crankshaft bearings from shocks and possible vibra-
tion damage during engine transport.
For installation and removal of the transport locking device, follow the in-
structions below:
1.
The transport locking device on both sides must remain installed as long as possible during engine installa-
tion in order to avoid damage.
2.
Prior to every engine transport (without generator) , the transport locking device on both sides must be in-
stalled according to the instructions.
3.
If the engine is to be moved together with the generator, the transport locking device for the generator must
also be installed (→ Page 22).
4.
Always use the screws supplied with or installed in the transport locking device to secure it on the engine.
5.
Starting or barring the engine is allowed only with the transport locking device removed. If the generator is
already mounted on the engine, ensure that the transport locking device of the generator is also removed.
6.
Attach this documentation to a highly visible area of the engine.
Removing the transport locking
device from driving end (KS),
version A
1.
Remove parts (1) to (8) from engine. The
spacer sleeves (5) are optional.
2.
Store the removed parts of the transport
locking device carefully for possible reuse.
MS150049/04E 2017-04
| Transport | 19
TIM-ID: 0000040575 - 002
