manualshive.com logo in svg

MTU 12V4000C Series, Operating Instructions Manual

Share
Download
MTU 12V4000C Series Operating Instructions Manual Download Page 138

8.19.3 Battery-charging generator – Removal and installation

Preconditions

☑

Engine is stopped and starting disabled

WARNING

Heavy part, risk of falling or overturning due to lack of stability.
Risk of crushing body or limbs!
• Use appropriate lifting gear and appliances.
• Wear safety shoes.

Removing battery-charging generator

1.

Remove protective cover.

2.

Mark electric cables on battery-charging generator and remove.

3.

Protect all cables from damage.

4.

Slacken screws (2) and (3) by half a turn.

5.

Mount socket or box wrench on screw (4)
and press belt tensioner in direction of arrow
as far as the stop.

6.

Tighten screw (2).

7.

Remove drive belt (1).

8.

Release screws (arrow).

9.

Remove battery-charging generator (1).

10.

Clean battery-charging generator (1) thor-
oughly (→ Page 137).

11.

Install battery-charging generator (1) follow-
ing reverse sequence of working steps.

12.

Adjust drive belt tension (→ Page 140).

138 | Battery-Charging Generator | MS150049/04E 2017-04

TIM-ID: 0000007425 - 007

Summary of Contents for 12V4000C Series


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands