INE-
DZB-712
Portable
Multi-parameter
Analyzer
22
4.6.3. View TDS Measurement Parameter
It is similar to View Conductive Measurement Parameter.
You can setup new TDS Factor.
You
can
also
setup
temperature
compensation
coefficient.
4.6.4. View DO Measurement Parameter
Under starting state,
a. Press ‘START’ key, move cursor to “PARA” by pressing F3;
b. Move cursor to ‘View DO Para’ by pressing F2 and then press “ENTER” key, the meter
enters into
View DO Para(view DO parameter)
mode which is shown as the chart..
On top of the screen is previous calibrated data
At the bottom is current air pressure (‘Pressure’) and
DO salinity (‘Salinity F’).
If you want to amend air pressure and salinity, you can set by pressing ‘AIR P.’ or ‘SALI F.’.
Generally it is not necessary to set air pressure and salinity. The default air pressure is 101.3kPa.
The default salinity is 0.0g/L.
4.7. View Stored Data
When measurement finishes, you can store measurement result for easy viewing and printing in
future.
Meter stores data according to measurement parameter. All stored data support GLP regulation.
You can store 200 sets in each of pH value, conductivity, TDS, salinity and saturation etc…which
accord with GLP. Apart from hydrogen ion, all other ion can make pX measurement and
concentration measurement. So the storage is according to pX measurement result and
concentration measurement result. Also all the measurement result are stored according to current
ion mode.
For example
, user select sodium ion mode to measure concentration of sodium ion, meter will
automatically assign a storage space for user to store the measurement result. 100 sets of pNa
measurement results (that is pX measurement result) and 100 sets of concentration measurement
results can be stored.
