INE-
DZB-712
Portable
Multi-parameter
Analyzer
10
For example:
Install conductive electrode, you can insert conductive electrode in conductive electrode socket
on rare panel of meter, then install in sequence measurement gland cover, cable obdurate ring,
top ring and union cap. If you want to take off measurement electrode, you can take off all
mentioned accessories in the opposite way.
Install temperature sensor, there are two ways for selection: one is using temperature sensor
directly, i.e. to install temperature sensor into DO electrode socket. The other way is: because
DO electrode consists of temperature measurement unit, when select installing DO electrode,
meter will automatically measure the temperature of solution. Generally, when you measure
DO value, you should use DO electrode, if measure other parameter, you will have two
selections. If DO electrode socket is not connected with any measurement electrode, meter will
automatically compensate through manual temperature compensation. Detailed compensation
will be varied according to different parameter.
b. USB communication line connection
If you want to adopt auxiliary communication software to connect with computer, you can link
meter and computer with USB communication line and install software properly then you can start
communication.
4.2. Power
Meter use four pieces of AA alkali battery. If it is your first time using the meter, please open the
battery cover on the back of meter and place four new AA alkali batteries correctly according to
‘+’, ‘-’ then cover the battery cover. Meter turns on automatically and in working state.
When battery is placed, but meter has no display, please recheck whether battery is placed
properly, battery is new or whether the connection is dropped off. If meter still does not work,
please contact with our company for inspection.
If you won’t use the meter for long time, please open the cover on back of the meter, take out
battery to avoid rotten which will cause damage to the meter.
If ‘Battery’ sign is displayed (on top right corner of screen), it means low battery, you need to
exchange all batteries and re-place the battery according to above mention way otherwise meter
will not guarantee the precision of measurement.
Please turn off the meter before exchanging
battery.
4.3. Turn on/off the meter
a.
Meter will turn on automatically every time when you placed new battery.
b.
In turn off state, press ‘ON/OFF/BKLIGHT’ key to turn on the power. When meter is on, it will
inspect automatically. Wait for a while, meter enters into starting state and you can use the meter
now.
c.
When using finishes, press ‘ON/OFF/ BKLIGHT’ key for more than 4 seconds, meter displays
‘Power Off’ and turns off.
d.
Automatic Shut-off function, the meter will shutdown in a default time without a keypress.
