INE-
DZB-712
Portable
Multi-parameter
Analyzer
18
GLP Mode
: It means meter has two modes, i.e. either select supporting GLP or do not select
supporting GLP. There will be different pattern in view and print stored data under these two
modes.
4.5.7. Set LCD Contrast(LCD Contrast)
You can adjust LCD contrast in certain range. If you find the display is not satisfied, you can
adjust the contrast to improve.
4.6.
View Function
For easy use, meter allows user to view current measurement parameter at random including
previous calibrating data and current using parameter, allows user to edit measurement parameter
directly. Meter also allows view stored data.
In starting state, press ‘START’(F1), select relevant item to view, edit measurement parameter and
view stored data.
4.6.1. View pH Measurement Parameter(View pH Para)
Under this function, user could view current pH calibration data. In starting state, press
‘START’(F1), and press F3 to move cursor at “PARA”, then select ‘View pH Para’ and press
‘ENTER’ key to enter into view pH measurement parameter mode.
On top of the screen are the last calibration data
including calibration time (Last Cali), amount of
calibration solution and calibration data in
correspondence to each standard buffer solution.
At the bottom is the condition of STD group.
If last calibration is multi-points calibration, user can press ‘←→’ to show detailed data of each
STD point.
Here, user could re-calibrate electrode slope (please refer to calibration chapter for detailed
calibration procedure), print calibration data and set new STD group.
