7 Functions and settings
126
TAPCON® 230 basic
2117246/02 EN
© Maschinenfabrik Reinhausen 2012
7.4.2.3
Setting the baud rate
In this screen you can set the baud rate for the COM1 interface. To do so, de-
fine for example the transmission speed for communicating with the TAP-
CON®-trol software.
The following values can be set:
9.6
kilobaud
19.2
kilobaud
38.4
kilobaud
57.6
kilobaud
To set the baud rate, proceed as follows:
1.
>
Configuration >
General >
2x
.
<02> Baud Rate.
2. Press
or
to to select the required
baud rate.
3. Press
.
The baud rate is set.
7.4.2.4
Setting the switching pulse time
This display can be used to set the duration of the switching pulse for the mo-
tor-drive unit.
If you set the raise or lower switching pulse time to 1.5 seconds for example,
after the set delay time T1 or T2 there will be a switching pulse of
1.5 seconds.
The waiting time between 2 consecutive switching pulses corresponds to the
set delay time T1 or T2.
