![background image](http://html.mh-extra.com/html/mr-beam/dreamcut-ii/dreamcut-ii_user-manual_1844420059.webp)
Page 53
06 - Working with your Mr Beam
FOCUSING
4. Positioning focus tool
Place the focus tool on the material and
the cross under the laser head.
2. Coarse focusing
The laser head can be mounted at four
different positions for coarse focusing.
1. Position the laser head
Move the laser head over the material by
double-clicking on the working area.
3. Precision focusing
Open the screw on the left side of the
laser head to move it up and down.
5. Move the laser head
Move the laser head down until it
touches the cross of the focus tool.
6. Fixing the laser head
Tighten the screw again moderately
and remove the focus tool.
0-16mm (0-0.6 inch)
8-24mm (0.3-0.9 inch)
12-30mm (0.5-1.2 inch)
20-38mm (0.8-1.5 inch)
Summary of Contents for Dreamcut II
