Mr Beam Dreamcut II, User Manual

Page: 54 / 90

Page 48 05 - Software Mr Beam Laserbench
7. Start
After the cover of the laser has been closed
and the confirmation button pressed,
Mr Beam will begin the laser job.
6. Transmission
Click on „Start“ to prepare the laser job
for Mr Beam.
5. Additional settings
The „Laser Intensity Range“ describes
the range of the gray levels displayed in
an engraving, while „Engraving Speed
Range“ describes the speed at which
gray values are engraved. When cutting
materials, „Laser Intensity“ represents
the power, „Laser Speed“ the speed and
„Passes“ how often the contour is cut.
Further explanations can be found under
the menu item „show explanations“.
MR BEAM LASERBENCH