MP Filtri PML2, User Manual

Page: 15 / 64

PC Operation 15
Erase Log This erases all the test results that are stored in the PML² mem-
ory.
Settings Opens the Settings dialogue, described in the next section.
4.6 Settings
Figure 5 Remote Device Settings dialogue
Use this dialogue box to examine the current settings stored in the PML², and
change the settings.
After making any changes, pressing the OK button will update the PML² with the
new settings. Or press Cancel to leave the settings as they were.
Test Reference Type in this box the description you wish to use for the test, e.g.
Vehicle 012. Up to 14 characters may be used.
Test Type Used to select one of the five available test types. It is recommended
that the PML² be usually operated in either the Normal test mode or the
Continuous test mode, until the user is fully familiar with the features.
The PML² test menu is harmonised with that of MP Filtri UK’s other
particle analysers and so can also perform Short, Triple and Dynamic
tests.
Normal Single Test: 15ml sample volume.