NOTE:
The installation of your dishwasher must be performed by qualified service personnel familiar
with food service equipment and must comply with all local health codes.
Problems due to improper installation are not covered by the Limited Warranty.
NOTE:
The installation of the dishwasher must comply with all local electrical, plumbing, health and
safety codes or in the absence of local codes, installed in accordance with the applicable
requirements in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC),
Part 1, CSA C22.1; and the Standard for Ventilation Control and Fire Protection of
Commercial Cooking Operations, NFPA 96.
CAUTION:
Be careful when lifting and moving the dishwasher to prevent damage to the machine.
1. Inspect the outside of the dishwasher carton for signs of damage.
2. Remove the carton and inspect the dishwasher for damage.
3. Check for any options or accessories that may have shipped with your dishwasher.
4. Compare the installation site utility connections with the dishwasher utility connections
and make sure they are the same.
5. The dishwasher can be installed as a free-standing unit or under a counter-top.
The typical counter-top height in most locations is 34" [86cm].
6. It is highly recommended that the
underside of the counter-top be clad
in metal.
7. Under counter installations should
provide storage space for the
dishwasher chemical supply
containers. Do not elevate the
containers above the finished floor.
8. Chemical supply containers should
be placed as close to the machine as
possible and the chemical tubing
taped to the back of the machine
should be repositioned before
permanently placing the machine.
9. Place the dishwasher in its permanent
location.
10. The dishwasher has 4 adjustable feet
for leveling.
11. Level the dishwasher front-to-back and side-to-side.
Receiving and Placement - Installation
Receiving - 201HT
Counter-top
Wall
3"
[8cm]
Min.
34"
[86cm]
Min.
Floor
Placement - 201HT
1
Summary of Contents for 201HT M4 Series
