Moyer Diebel 201HT M4 Series, Installation & Operation Manual

Page: 46 / 120

Installation - 201LT
(Single Phase) Electrical Connections -
201LT
! ATTENTION !
Model 201LT is equipped with a 4 ft. power cord and plug. These models require a
115VAC,15A receptacle.
L1 N
115VAC
15A
4 ft. power cord w/plug supplied
SINGLE PHASE POWER CONNECTION
Model 201LT
WARNING:
Electrocution or serious injury may result when working on an
energized circuit.
Disconnect power at the main breaker or service disconnect switch
before working on the circuit.
Lock-out and tag the breaker or service disconnect switch to
indicate that work is being performed on the circuit.
! ATTENTION !
A qualified electrician must connect the main incoming power to the dishwasher in
accordance with all local codes and regulations or in the absence of local codes in
accordance with the National Electrical Code or the Canadian Electrical Code.
Refer to the connection diagram below for single a phase machine without a built-in booster.
1. A three prong 4 foot power cord and plug is prewired with the machine for connection to a
115VAC power source.
38