NOTE:
The installation of your dishwasher must be performed by qualified service personnel familiar
with food service equipment and must comply with all local health codes.
Problems due to improper installation are not covered by the Limited Warranty.
NOTE:
The installation of the dishwasher must comply with all local electrical, plumbing, health and
safety codes or in the absence of local codes, installed in accordance with the applicable
requirements in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC),
Part 1, CSA C22.1; and the Standard for Ventilation Control and Fire Protection of
Commercial Cooking Operations, NFPA 96.
CAUTION:
Be careful when lifting and moving the dishwasher to prevent damage to the machine.
1. Inspect the outside of the dishwasher carton for signs of damage.
2. Remove the carton and inspect the dishwasher for damage.
3. Check for any options or accessories that may have shipped with your dishwasher.
4. Compare the installation site utility connections with the dishwasher utility connections
and make sure they are the same.
5. The dishwasher can be installed as a free-standing unit or under a counter-top.
The typical counter-top height in most locations is 34" [86cm].
6. It is highly recommended that the
underside of the counter-top be clad
in metal.
7. Under counter installations should provide
storage space for the dishwasher chemical
supply containers. Do not elevate the containers
above the finished floor.
8. Chemical supply containers should be placed
as close to the machine as possible and the
chemical tubing
taped to the back of the machine should be
repositioned before permanently placing the
machine.
9. Place the dishwasher in its permanent location.
10. The dishwasher has 4 adjustable feet for
leveling.
11. Level the dishwasher front-to-back and side-to-side.
Receiving and Placement - Installation
Receiving - 201LT
Counter-top
Wall
3"
[8cm]
Min.
34"
[86cm]
Min.
Floor
Placement - 201LT
37
Summary of Contents for 201HT M4 Series
