Moyer Diebel 201HT M4 Series, Installation & Operation Manual

Page: 11 / 120

201HT - Installation
Refer to the photo below.
1. All models are equipped with a 6 ft.. 5/8" I.D. drain hose. The maximum drain
height connection must not exceed 3 ft.[1 m] and must be vented to prevent
the wash tank from siphoning.
2. The drain hose is located at the rear of the dishwasher, and is secured to the rear of
the machine by two clamps to maintain an anti-siphoning loop in the drain hose.
3. A 3/4" hose barb fitting is strapped to the drain hose prior to shipment.
The service part number for the hose barb is P/N 0512321.
4. Additional plumbing parts must be supplied by the plumbing installer.
5. The maximum drain flow is 15 US gpm/12.4 imp gpm/60 lpm.
! VERY IMPORTANT !
Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.
Drain Connections - 201HT
3/4" DRAIN HOSE BARB FITTING
STRAPPED TO DRAIN HOSE
DO NOT REMOVE HOSE CLAMPS
NOR STRETCH HOSE
! ATTENTION !
FAILURE TO FOLLOW THE DRAIN CONNECTION INSTRUCTIONS MAY VOID THE WARRANTY.
3