Motorola MC75A User Manual Download

Page: 181 / 232

Maintenance & Troubleshooting

8 - 9

MC75A battery is not
charging.

MC75A was
removed from
cradle or cradle was
unplugged from AC
power too soon.

Ensure cradle is receiving power. Ensure MC75A is seated
correctly. Confirm main battery is charging under

Start

Settings

Power

Battery is faulty.

Verify that other batteries charge properly. If so, replace the faulty
battery.

The MC75A is not
fully seated in the
cradle.

Remove and re-insert the MC75A into the cradle, ensuring it is
firmly seated.

Ambient
temperature of the
cradle is too warm.

Move the cradle to an area where the ambient temperature is
between 0°C (32°F) and 35°C (95°F).

Extreme battery
temperature.

Battery does not charge if ambient temperature is below 0°C (32°F)
or above 40°C (104°F).

Spare battery is not
charging.

Spare battery
inserted incorrectly.

Re-insert the spare battery so the charging contacts on the battery
align with the contacts on the cradle.

Spare battery is
faulty.

Verify that other batteries charge properly. If so, replace the faulty
battery.

Ambient
temperature of the
cradle is too warm.

Move the cradle to an area where the ambient temperature is
between 0°C (32°F) and 35°C (95°F).

During data
communication, no
data transmits, or
transmitted data was
incomplete.

MC75A removed
from cradle during
communications.

Replace MC75A in cradle and retransmit.

Incorrect cable
configuration.

See the system administrator.

Communication
software is not
installed or
configured properly.

Perform setup as described in the

MC75A Enterprise Digital

Assistant Integrator Guide.

Table 8-3

Troubleshooting the Single Slot USB/Serial Cradle (Continued)

Symptom

Possible Cause

Action

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands

Motorola MC75A, User Manual

Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands