Motorola MC75A User Manual Download Page 48

Page: 48 / 232

2 - 16 MC75A Enterprise Digital Assistant User Guide

Figure 2-15

LED Indicators

Table 2-5

LED Indications

LED State

Indication

Scan/Decode LED

Solid Green

Successful decode/capture.

Solid Red

Laser enabled, scanning/imaging in process.

Blink Red

MC75A is going into suspend mode.

Off

Not enabled.

Charging/Battery Status LED

Slow Blinking Amber

Main battery in MC75A is charging.

Solid Amber

Main battery in MC75A is fully charged.

Fast Blinking Amber

Charging error.

Off

Not charging.

Single Blink Amber (when Power button pressed)

Battery depleted.

Blinking Amber (when Power button pressed)

Battery over-temperature condition.

Radio Status LED

Slow Blinking Green

WAN radio is on.

Off

WAN radio is off.

Radio Status LED

(MC75A6/8 only)

Scan/Decode

LED

Charging/Battery

Status LED

NOTE

For information about scanning/decoding, see

Chapter 3, Data Capture

. For information about WAN radio

status and settings, see

Chapter 4, Using the Phone

, or refer to the

MC75A Enterprise Digital Assistant

Integrator Guide.

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Motorola MC75A, User Manual, Page: 48 / 232

Search results

Summary of Contents for MC75A

Reviews: